Marley Alutec product conformity statement

Marley Alutec aluminium rainwater systems have a functional life-expectancy of 50+ years. All products are manufactured using only marine grade aluminium and external grade architectural powder coated finishes.

Marley Alutec aluminium rainwater systems have a functional life-expectancy of 50+ years with minimal maintenance. All products are manufactured using only marine grade aluminium and coated with external grade architectural powders.

Material grades
Castings: LM6 grade
Extrusions: 6063 T5 grade

Standards to which we comply and exceed:

Testing
BS EN ISO 9227:2012 – Corrosion tests in artificial atmospheres. Salt spray tests.
BS EN 1462:2004 - Brackets for eaves gutters. Requirements and testing.
BS EN 12056-3:2000 - Gravity drainage systems inside buildings. Roof drainage, layout and calculation.
BRE - Wind load testing (Coping)
CRM - Accelerated thermal movement joint test (Gutters)
CRM – Roof gully drainage capacities (Roof outlets)

Fire ratings
BS 476-6 Class 0 – Contribution to the growth of fire (Fascia, soffit & copings)
BS476-7 Class 1 – Surface spread of flame (Fascia, soffit & copings)
EN 13501-1 – A2-s1,d0 (Polyester powder coatings)
EN 13501-1 – Class D (Fascia, soffit & copings)
BS476 – Non-combustible materials (Gutters and pipes)

Manufacture
BS EN 755-2:2013 – Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties.
BS EN 12020-2:2008 - Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form.
BS EN 1706:2010 - Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties.
BS EN 1559-2:2014 – Founding. Technical conditions of delivery.
BS EN 515:1993 - Aluminium and aluminium alloys. Wrought products. Temper designations.
BS EN 573-3:2013 - Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products.
BS EN 485-2:2013 - Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties.

Design
BS 8530:2010 - Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification.
BS EN 12056-3:2000 - Gravity drainage systems inside buildings. Roof drainage, layout and calculation.
BS EN 1253-2: 2002 – Roof drains and gullies without trap

Accreditation
ISO 14001 – Environmental management systems

The above statements and standards are also published within our product relevant sales literature.

Marley Alutec is part of the Aliaxis Group of Companies, a worldwide conglomerate employing more than 16,000 people, and present in over 45 countries. You can, therefore, rest assured that you are partnering with a well-respected company within our industry.

For further information about our standards and accreditations, please click here.

CE Marking

CE Marking is not a requirement for gutters and associated products. For further information please visit the MGMA website.

However, Marley Alutec have 2 products in their product range which comply with the requirement of harmonised European standards (hENs). Please see and download below the Declaration of Performance (DoP) for Marley Alutec Silicone sealants, product codes SC101 and SC103.

CE marking DoP for silicone sealants product codes SC101 and SC103

  • SC101 Silicone sealant Declaration of Performance (DoP)

    PDF - 230.43 KB
  • SC103 Silicone sealant Declaration of Performance (DoP)

    PDF - 475.39 KB
Requirements List

Add product qty and all relevant information to your requirement list ready to send for an estimate

Request an Estimate Remove All