Marley Alutec product conformity statement

Product conformity statement

Marley Alutec aluminium rainwater systems have a functional life-expectancy of 50+ years. All products are manufactured using only marine grade aluminium and external grade architectural powder coated finishes.

Material grades:
Castings: LM6 grade
Extrusions: 6063 T5 grade

Standards to which we comply and exceed:

Testing
BS EN ISO 9227:2012 – Corrosion tests in artificial atmospheres. Salt spray tests.
BS EN 1462:2004 - Brackets for eaves gutters. Requirements and testing.
BS EN 12206-1:2004 - Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder.
BS EN 12056-3:2000 - Gravity drainage systems inside buildings. Roof drainage, layout and calculation.
BRE - Wind load testing (Coping)
CRM - Accelerated thermal movement joint test (Gutters)

Manufacture
BS EN 755-2:2013 – Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties.
BS EN 12020-2:2008 - Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form.
BS EN 1706:2010 - Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties.
BS EN 1559-2:2014 – Founding. Technical conditions of delivery.
BS EN 515:1993 - Aluminium and aluminium alloys. Wrought products. Temper designations.
BS EN 573-3:2013 - Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products.
BS EN 485-2:2013 - Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties.
BS EN 12206-1:2004 - Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder.

Design
BS 8530:2010 - Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification.
BS EN 12056-3:2000 - Gravity drainage systems inside buildings. Roof drainage, layout and calculation.

Accreditation
ISO 14001 – Environmental management systems

The above statements and standards are also published within our product relevant sales literature.

For further information about our standards and accreditations, please click here.

CE Marking

CE Marking is not a requirement for gutters and associated products. For further information please visit the MGMA website.

However, Marley Alutec have 2 products in their product range which comply with the requirement of harmonised European standards (hENs). Please see and download below the Declaration of Performance (DoP) for Marley Alutec Silicone sealants, product codes SC101 and SC103.

Requirements List
Requirements List

Add product qty and all relevant information to your requirement list ready to send for an estimate

  • X
Request an Estimate Remove All

Welcome to Alutec

Alutec is the UK leader in innovative aluminium rainwater and eaves drainage solutions.

Did you know your Internet Explorer is out of date?

To get the best possible experience using our website we recommend that you upgrade to a newer version or other web browser. A list of the most popular web browsers can be found below.

Just click on the icons to get to the download page

If you understand that your browser is inadequate but you still wish to view the site click here