| |
|
Alutec
Floor Outlet Typical Applications
Please select a link for further information;
Vertical Spigot Untrapped - Screeded Floor Finish |
• Connect outlet spigot to drainage
pipework coupling. Ensure flange is level with finished slab prior
to grouting into pre-formed hole.
• Lay waterproofing
membrane over concrete slab and outlet body. Place clamping ring into
position and fix down, securely clamping membrane onto neoprene 'T'
ring.
• Cut away waterproofing membrane inside outlet
and insert grate/bezel assembly. Using Marley silicone lubricant,
SZ56 to ease height adjustment adjust height to screed level.
|
 |
• Lay screeded floor finish
flush with top of grate/bezel. |
Trapped Horizontal Spigot Outlet - Tiled Floor Finish |
• Connect outlet spigot to drainage
pipework. Test pipework joint. Set outlet body at appropriate height
so flange is level with slab. Secure body position by haunching with
concrete, prior to concrete slab being poured.
• Remove
neoprene 'T' ring from outlet body flange, then dress asphalt over
flange and into 'T' ring groove.
|
 |
• Remove Trap from grate/bezel
assembly. Insert bezel into clamping ring. Using Marley silicone lubricant,
SZ56 to ease insertion and height adjustment, adjust grate height
to be level with tiled floor finish surface.
• Lay
screed making allowance for tile thickness so finished surface is
flush with grate.
• Place trap dip tube into bezel
assembly. Ascertain length of dip tube required, cut to length, place
into bezel and secure grate. |
Trapped 45 Degree Spigot Outlet – Flexible Sheet Flooring |
• Connect outlet spigot to drainage
pipework. Test pipework joint. Set outlet body at appropriate height
so flange is level with slab. Secure body position by haunching with
concrete, prior to concrete slab being poured.
• Lay
waterproofing membrane over concrete slab and outlet body. Place clamping
ring into position smear silicone sealant over threads of clamping
flange securing bolts and fix down, securely clamping membrane onto
neoprene 'O' ring.
|
 |
• Cut away waterproofing membrane
inside outlet and insert grate/bezel assembly. Using Marley silicone
lubricant, SZ56 to ease height adjustment adjust height to screed
level.
• Lay screeded floor finish flush with top edge
of grate/bezel.
• Lay flexible sheet flooring over
outlet, then cut approx 135mm hole directly above the outlet.
• Secure clamping ring of bezel assembly to seal sheet
flooring to outlet.
• Place trap dip tube into bezel
assembly. Ascertain length of dip tube required, cut to length, place
into bezel (ensuring the rubber seal is placed under the dip tube
funnel) and secure down grate. |
Floor Grates - Height Variation
|
 |
|
